Standard Decorative Metal Finishes

DECO – Patterned and Embossed Finishes - NZ Stock Range

Deco#2
Brush Finish
T304
0.80 x 1250mm
Length: 2500 & CTL

Deco #9
Brush Finish
T304
0.80 x 1250mm
Length: 2500 & CTL

1.20 x 1000/1250mm
Length: 2438, 3048, 3658, 5000mm & CTL

Deco #16
Brush Finish
T304
0.80 x 1250mm
Length: 2500 & CTL

1.20 x 1000mm
Length: 2438, 3048, 3658, 5000mm & CTL

Deco rolled surface finishes are rolled on one side, producing a highly decorative surface with a high resistance to wear and scratching.

AN5
Brush Finish
T304
0.60 x 1250mm
Length: 2500 & CTL

1.20 x 1000/1250mm
Length: 2438, 3048, 3658, 5000mm & CTL

AN6
Brush Finish
T304
1.60 x 1250mm
2500, 3000 & CTL

Deco pattern rolled surface finishes (AN series) are rolled on two sides. This process improves sheet stiffness and mechanical properties which enables significant weight savings over flat sheets.

Applications Lift doors and interiors Escalator cladding Toilet & shower partitions Door cladding Wall panels & cladding Playground slides Kitchen bench tops Reception counters Protective shields

CTL = “Cut To Length” (customer specified sheet lengths, subject to production programmes)
Other Grades, Sizes & Thicknesses Available Subject To Mill Minimum Quantities

Request Sample / Information